How to Make the Letter U and K Out of PVC With Don Chan
How to make letter PVC letters!!!
Step 1: Measure the PVC for Letter U and K
First, for the letter U you are going to measure two 10 inches for the length and mark where it meets 12 inches.
Second, you are going to measure a 8 inch piece of pvc
First, for the letter K you are going to measure 12 inches for the length of the letter K
second, you going to measure five 2 inches piece of pvc.
Step 2: Cut the PVC
1.) Make sure your measurements are 10 inches and one 8 inch for the letter U.
2.) Measure two 8 inches PVC, measure five 2 inch PVC pipes for the letter K.
2. Make sure the cuts are perfect.
Step 3: Connect the PVC to the Connects
1.) Photo one and two, connect the ten inch piece to 90 degree connector
2.) Photo two and three, connect the 8 inch pvc to the T connector. Connect the 2 inch to another T connector and put two 2 inch PVC pipes and connect 45 degree connectors at the ends. Place another 2 inch PVC at the ends of the 45 degree connector.